Remanufactured Toyota U241E Transmissions: Specs & Updates

To get an estimate on a rebuilt U241E, click Get a Free Estimate.

Need a replacement transmission? Get an estimate for replacement transmissions and local installation. Look up your transmission model by vehicle make and model.

What Transmission Do I Have?

Replacement U241E Transmission Prices:

Pricing varies by model. To be 100% sure on pricing, have your VIN# handy and use our Get An Estimate feature to look up your transmission by VIN#.

U241E Applications and Compatibility:

Model
Toyota Camry
Toyota Highlander
Toyota RAV4
Toyota Solara

U241E Transmission Diagnostic Trouble Codes | DTC

Trouble CodeDescription
P0711Transmission Fluid Temperature Sensor Circuit Range/Performance
P0712Transmission Fluid Temperature Sensor Circuit Low Input
P0713Transmission Fluid Temperature Sensor Circuit High Input
P0717Input/Turbine Speed Sensor Circuit No Signal
P0724 Torque Converter/Brake Switch B Circuit High
P0741Torque Converter Clutch Circuit
P0746Pressure Control Solenoid 'A' Performance or Stuck Off
P0748Pressure Control Solenoid 'A' Electrical
P0766Shift Solenoid 'D' Performance or Stuck Off
P0776Pressure Control Solenoid 'B' Performance or Stuck Off
P0778Pressure Control Solenoid 'B' Electrical
P0793Intermediate Shaft Speed Sensor Circuit No Signal
P0982Shift Solenoid “D” Control Circuit Low
P0983Shift Solenoid “D” Control Circuit High
P2714Pressure Control Solenoid ‘D’ Performance or Stuck Off
P2716Pressure Control Solenoid ‘D’ Electrical
P2769Torque Converter Clutch Circuit Low

Common U241E Transmission Problems

Erratic Shifting / Loss of Forward Gears: If you’re experiencing U241E transmission problems like slipping, erratic shifting, or failed gear engagement, the causes could range from a failed U241E solenoid / U241E-HD solenoid, to a U241E torque convertor issue.

Another common problem is overheating. This happens when the moving parts inside the transmission are creating more friction heat than the ATF can remove. The most common cause of this condition is towing heavy loads, driving in stop/go traffic, or on mountain roads where the transmission has to shift a lot.

Loss of 4th Gear and/or Reverse: Another common problem is an inoperable fourth or reverse gear. These issues are often caused by design flaws in the Reverse Boost Valve, channel plate, and stripped splines on the 4th gear clutch hub shaft.

Updates to Remanufactured U241E Transmissions

• A remanufactured and improved torque converter is included with every transmission.
• To eliminate the possibility of front seal leaks, vibration, and premature bushing wear, all torque converters are tested for leaks, lock-up, concentricity, and balance.
• Every fully remanufactured valve body, with complete system correction and recalibration kit, is tested independently.
• All wear-prone valves are restored to stringent specifications and vacuum tested to confirm proper function.
• Each remanufactured transmission is hot, cold, load, and simulated road tested using our proprietary CARS (Computer-Aided Road Simulation) dynamometer program.
• All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

How to Buy a Remanufactured U241E Transmission

1) Buying Locally

When you go to your local repair shop, they’ll order a remanufactured U241E transmission, then mark up the price. So at the end of the day, you’ll be paying 15% to 30% more than the actual cost of the unit.

2) Buying Online

Buying a reman transmission through a company like Street Smart Transmission will save you a considerable amount of money because you pay the wholesale price (avoiding a repair shop’s 15% to 30% markup), they’ll ship the unit to the shop of your choice free of charge, and returning your old transmission is free as well. Then all you have to pay for is the labor to install the unit (usually $400 to $800), and you’re on your way.

How Does it Work?

To order a remanufactured U241E transmission from a company like Street Smart Transmission, all you need to do is provide your vehicle’s VIN number, the mileage, and the address of the repair shop that you want it shipped to.

Financing

Replacing a transmission can be expensive, so Street Smart Transmission offers financing through PayPal Credit. Depending on your credit, you’ll be able to order a new transmission, get back on the road, then pay for it over time. You may have to pay labor charges for the installation up front, but you won’t have to shell out for the transmission all at once.

Shipping Charge/Location

When it comes to shipping, a transmission is quite heavy. So you’re going to pay quite a bit of money, unless the reman transmission company offers free shipping. Street Smart offers free shipping to a business address, which is usually the repair shop that you’ve chosen to install the unit.

What is a Core Charge (Core Deposit)?

Every remanufactured transmission originally came from somebody else’s car. Therefore, they need your broken transmission in order to refurbish it for another customer.

Your old/damaged transmission is called a “core”, and many companies will collect a core charge (usually $500 to $1500), which will be refunded once they receive your old transmission. (Street Smart does not charge an up-front core charge.) Make sure to ask any company for their core return policy, so you’ll know what to expect.

Easy Core Return

Our Recommendation

We recommend Street Smart Transmission. We have found Street Smart to be of the highest quality. Their transmissions carry a 3 year / unlimited miles warranty that covers both parts and labor. Their warranty is nationwide and attached to the VIN so it is transferable with ownership if you decide to sell the vehicle. It also covers both parts and labor for the installation of the replacement transmission.

Watch the Remanufacturing Process

How it Works

steps

Finding a Shop to Install the Remanufactured Transmission

If your transmission has failed, you’re going to need a skilled mechanic to replace it. You can find a shop to install your transmission using our shop locator map.

For warranty purposes, you need to find a reliable repair shop. That way, if the replacement transmission doesn’t work properly, the warranty will cover it.

Ready to Replace Your U241E Transmission?

Click Get a Free Estimate for an unbeatable price on a replacement remanufactured transmission.

Need a replacement transmission? Get an estimate for replacement transmissions and local installation. Look up your transmission model by vehicle make and model.

What Transmission Do I Have?

Your Name
Email Not Required
0 Tell us about your transmission problems
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x