Ford Police Interceptor Transmission Problems & Cost | 4R75E / 4R70W | 6F 50

The Ford Crown Victoria Police Interceptor was equipped with the 4R75E or 4R70W transmission, while the later Ford Taurus / Explorer based Ford Police Interceptor Sedan / Utility used the 6F50 But they aren’t without their problems though, so let’s look at some of the most common Ford Police Interceptor transmission problems, look at cost estimates and figure out what you can do about them.

Need a replacement transmission? Get an estimate for replacement transmissions and local installation. Look up your transmission model by vehicle make and model.

What Transmission Do I Have?

Ford Police Interceptor Transmission Models

Ford Police Interceptor: 4R75E Transmission
Ford Police Interceptor: 4R70W Transmission
Ford Police Interceptor: 6F50 Transmission

Ford Police Interceptor Transmission Replacement Cost Estimate

Pricing varies by model. To be 100% sure on pricing, have your VIN# handy and use our Get An Estimate feature to look up your transmission by VIN#.

Replacement 4R75E / 4R70W Transmission:

TransmissionStreet Smart TransmissionAutozoneAdvance Auto PartsDealer Retail
4R75E/W 4R70W1687188518852839

What are the DTC codes related to Ford Police Interceptor transmission problems?

Trouble CodeDescription
P0700Transmission Control System (MIL Request)
P0703Torque Converter/Brake Switch B Circuit
P0705Transmission Range Sensor Circuit Malfunction (PRNDL Input)
P0707Transmission Range Sensor Circuit Low Input
P0708Transmission Range Sensor Circuit High Input
P0711Transmission Fluid Temperature Sensor Circuit Range/Performance
P0712Transmission Fluid Temperature Sensor Circuit Low Input
P0713Transmission Fluid Temperature Sensor Circuit High Input
P0714Transmission Fluid Temperature Sensor Circuit Intermittent P0715
P0715Input/Turbine Speed Sensor Circuit
P0717Input/Turbine Speed Sensor Circuit No Signal
P0718Input/Turbine Speed Sensor Circuit Intermittent
P0720Output Speed Sensor Circuit
P0721Output Speed Sensor Circuit Range/Performance
P0722Output Speed Sensor Circuit No Signal
P0723Output Speed Sensor Circuit Intermittent
P0729Gear 6 Incorrect Ratio
P0730Incorrect Gear Ratio
P0731Gear 1 Incorrect Ratio
P0732Gear 2 Incorrect Ratio
P0733Gear 3 Incorrect Ratio
P0734Gear 4 Incorrect Ratio
P0735Gear 5 Incorrect Ratio
P0748Pressure Control Solenoid 'A' Electrical
P0750Shift Solenoid 'A'
P0751Shift Solenoid 'A' Performance or Stuck Off
P0752Shift Solenoid 'A' Stuck On
P0753Shift Solenoid 'A' Electrical
P0755Shift Solenoid 'B'
P0756Shift Solenoid 'B' Performance or Stuck Off
P0757Shift Solenoid 'B' Stuck On
P0758Shift Solenoid 'B' Electrical
P0760Shift Solenoid 'C'
P0761Shift Solenoid 'C' Performance or Stuck Off
P0762Shift Solenoid 'C' Stuck On
P0763Shift Solenoid 'C' Electrical
P0765Shift Solenoid 'D'
P0766Shift Solenoid 'D' Performance or Stuck Off
P0767Shift Solenoid 'D' Stuck On
P0768Shift Solenoid 'D' Electrical
P0770Shift Solenoid 'E'
P0771Shift Solenoid 'E' Performance or Stuck Off
P0772Shift Solenoid 'E' Stuck On
P0773Shift Solenoid 'E' Electrical
P0774Shift Solenoid 'E' Intermittent
P0777Pressure Control Solenoid 'B' Stuck On
P0778Pressure Control Solenoid 'B' Electrical
P07811-2 Shift
P07822-3 Shift
P0791Intermediate Shaft Speed Sensor Circuit
P0793Intermediate Shaft Speed Sensor Circuit No Signal
P0817Transmission Fluid Pressure Manual Valve Position Switch Reverse with Drive Ratio
P0817Starter Disable Circuit
P0960Pressure Control Solenoid “A” Control Circuit/Open
P0962Pressure Control Solenoid “A” Control Circuit Low
P0963Pressure Control Solenoid “A” Control Circuit High
P2703Transmission Friction Element D Apply Time Range/Performance

Ford Police Interceptor Transmission Recalls

None Found

Ford Police Interceptor Technical Service Bulletins (TSB)

TSB 10-23-7 – Transmission Cooler Leak
2008 – 2011 Ford Crown Victoria
Problem – It’s not uncommon for a transmission fluid leak to develop on the driver’s side transmission cooler tube
Solution – Replace transmission cooler core

TSB 13-4-23 – 4R75E Transmission – Grinding/Slipping/Loss of Reverse
2008 – 2011 Ford Crown Victoria
Problem – Some vehicles may experience a grinding/whining noise, unusual vibrations, slipping, and potentially a loss of reverse gear, all resulting from a failure of the planetary gear assembly
Solution – Install planetary upgrade kit and new torque converter

TSB 10-22-4 – AWD vehicles – Shudder/chatter/vibration on turns or thump/clunk noise on light acceleration – 6F Transmission
2010 Ford Fusion – 2010 Ford Taurus – 2010 Ford Edge – 2010 Ford Flex – 2010 Mercury Milan – 2010 Lincoln MKS – 2010 Lincoln MKZ – 2010 Lincoln MKT – 2010 Lincoln MKX
Problem – Certain vehicles built between 10/1/2009-12/31/2009 equipped with all-wheel-drive, may experience a shutter or vibration in the driveline during a tight turn. They may also experience a thump or clunk noise during light acceleration. These symptoms may also occur under 40 mph (64 KM/H), when driving uphill or towing under heavy acceleration.
Solution – Installing a properly remanufactured PTU (Power Transfer Unit— a simplified transfer case) may solve this problem.

TSB 11-12-10 – Sluggish acceleration from 0-5 mph (0-8 km/h) followed by harsh bump or slip on takeoff – 6F35 Transmission & 6F50 Transmission
2010 – 2011 Ford Taurus – 2009 – 2011 Ford Edge – 2009 – 2011 Ford Flex – 2011 Ford Explorer – 2010 – 2011 Lincoln MKS – 2009 – 2011 Lincoln MKX – 2010 – 2011 Lincoln MKT
Problem – Some vehicles may experience sluggish acceleration or a hesitation feel during a rolling stop, followed by a harsh bump or slip feeling. This can be caused by a design flaw in the 6F35 valve body / 6F50 valve body.
Solution – On transmissions originally built for Mercon LV transmission fluid (listed on the dipstick), the valve body will have to be modified by deleting one hole in the valve body separator plate, and removing the check ball in the area of the deleted hole. If this modification is not performed properly, the transmission may experience a loss of reverse or a 2-3 shift flare.

TSB 15-0047 / 17-2219 – Push button start – Shift to Park or Transmission Not In Park message – discharged battery – unable to remove key
2011 – 2017 Ford Edge – 2011 – 2017 Ford Explorer – 2011 – 2017 Ford Flex – 2011 – 2017 Ford Police Interceptor Sedan – 2011 – 2017 Ford Taurus – 2011 – 2016 Lincoln MKS – 2011 – 2017 Lincoln MKT – 2011 – 2015 Lincoln MKX
Problem – Vehicles equipped with a floor shift selector lever and push button start, may display a ‘Shift To Park’ or ‘Transmission Not In Park’ message, even though the transmission is actually in Park. It may also not be possible to remove the transmitter key, and the battery may discharge due to the warning message remaining illuminated.
Solution – Install new park detect switch

TSB 10-21-2 / 10-17-4 – Slipping, 5th gear starts from stop, PRNDL display error, backup camera on while vehicle is in Drive – 6F50 Transmission & 6F55 Transmission
2009 – 2011 Ford Taurus – 2009 – 2011 Ford Edge – 2009 – 2011 Ford Flex – 2009 – 2011 Lincoln MKS – 2009 – 2011 Lincoln MKT – 2009 – 2011 Lincoln MKX
Problem – Certain vehicles may intermittently experience slipping, 5th gear starts from a stop, the electronic PRNDL display may flash errors, and the backup camera may be on while the vehicle is in Drive.
Solution – Install new Ford transmission range sensor / TR sensor.

Common Problems with the Ford Police Interceptor Transmission

TCC Application in 2nd Gear – 4R75E Transmission

2005 – 2006 Ford Crown Victoria
Problem – A lack of power after the 1-2 shift can be caused by an un-commanded torque converter clutch application / TCC apply. The P0742 and/or P1742 DTCs may also be stored.
Solution – The #7 check ball inside of the valve body may have worn down to an incorrect size, allowing the torque converter clutch to apply after the 1-2 shift. Replacement of this check ball may solve the problem.

Slipping in All Forward Gears – 4R75E Transmission / 4R70 Transmission

2005 – 2006 Ford 4R75E Transmission
Problem – Many 2005 – 2006 Ford vehicles equipped with the 4R75E transmission, may experience excessive slipping in all forward gears. Metal shavings may also be present in the transmission fluid.
Solution – Replace forward clutch drum and update ECU with program 06B06

Lack of Response
Leaking Fluid
Low Fluid
Burning Smell
Grinding or Shaking
Whining, Clunking or Humming
Refuses to Go Into Gear
Torque Converter Issues
Valve Body Issues
Transmission Noisy in Neutral
Gears Slipping
No 3rd or 4th Gear
No 1st or 2nd Gear
No Reverse
Dragging Clutch
Trouble Codes / Check Engine Light

Ford Crown Vic P71 Police Interceptor 3rd gear slipping

The Ford Crown Vic P71 Police Interceptor is one of the most legendary police cars ever made. But a 3rd gear slip could leave you having a very bad day. This is a common transmission problem for 2001 and later cars equipped with the 4R70W/4R70E or 4R75E transmission. When it happens, you’ll notice that the transmission shifts to neutral during the 3-4 shift. You also won’t get any engine braking if you manually shaft into the 2 position.

Cause of most Ford Crown Vic P71 Police Interceptor 3rd gear shift problems

On the Ford Crown Victoria P71 Police Interceptor 4R70W/4R70E or 4R75E transmission, shifting problems can be caused by a broken overdrive server retaining snap ring or overdrive servo piston ‘E’ clip. If this happens, debris can get lodged in the overdrive servo regulator valve, which will prevent the valve from operating sufficiently enough to allow the overdrive band to make a full apply. When correcting the issue, the overdrive servo regulator valve assembly needs to be removed from the valve body and any damage from the debris has to be fixed to prevent future transmission problems. Most mechanics forget to do this on a rebuild, but Street Smart Transmission does it during every reman Ford Crown Vic P71 Police Interceptor transmission build.

How much is it going to cost to fix my 4R70W/4R70E or 4R75E transmission?

Unfortunately, the problem described here will require the removal and disassembly/partial disassembly of your transmission. Given the labor time involved to remove the transmission from the vehicle (this is not a simple task), most repair shops will recommend that you go ahead and rebuild the entire transmission while it’s out. Since they already have to tear it down to replace the 4R70W/4R70E or 4R75E transmission, it sort of makes sense to spend the extra money to do that. After all, you should get a lot more mileage out of your transmission once it’s rebuilt. And since they’ve already got the transmission apart, might as well, right?

Can I drive with a transmission problem?

If your Ford Police Interceptor can still make it up and down the road, you might say “It’s fine, I’ll just drive it until I can get it fixed”. But that is not always a good idea, depending on the symptoms. You see, there are a lot of (very expensive) moving parts inside of a transmission, and if something isn’t right, continuing to drive with a transmission problem could damage something else.

How often does a Ford Police Interceptor transmission need to be replaced?

The overall lifespan of a Ford Police Interceptor transmission largely depends on how well it was maintained. Factory design flaws also factor into this equation, along with how/how hard you drive. But on average, we’ve seen the Ford Police Interceptor transmission last for between 130,000-180,000 miles. A high quality replacement transmission however, can last considerably longer if all of the factory design flaws have been addressed and the vehicle has been maintained.

How are Ford Police Interceptor transmission issues diagnosed?

It is fairly easy to guesstimate what the root cause of your Ford Police Interceptor transmission problems might be, but you won’t truly know unless you have the right tools and experience. A good mechanic or transmission repair center will be able to connect your truck to a computer and find out which diagnostic trouble codes (DTC’s) have been stored. Once they know what to look for, they can perform a visual inspection to verify the problem.

How is a Ford Police Interceptor transmission replaced?

In order to replace your Ford Police Interceptor transmission, the truck has to be lifted from the ground in order to gain access to all of the parts that will need to be unbolted. Then the transmission can be lowered to the ground (typically with a transmission jack), so the new transmission can be installed. Once it is in place, for the 6L80, the vehicle PCM will have to be reprogrammed / reflashed to accept the new transmission using the latest GM subscription.

Recommendations for Ford Police Interceptor transmission issues?

To save time and get back on the road faster, have your 17-digit truck VIN# handy and you can get an online quote for a reman Ford Police Interceptor transmission here, then find a local shop using our Find a Shop guide to install it for you.

How to Solve Ford Police Interceptor Transmission Problems

Solution A: Buy a Used Ford Police Interceptor Transmission

The quickest way to fix your transmission problems is to simply buy a used transmission or used transmission. These can be found at most junk yards, and they often come with a 30-90 day warranty. However, there’s no way to determine the actual condition of the internal components, so you could be spending a bunch of money to have the exact same problems. Plus, that warranty only covers the transmission if it’s defective, not the labor costs that you’ll have to pay.

Solution B: Buy a Rebuilt Ford Police Interceptor Transmission

Another option would be a rebuilt transmission or rebuilt transmission. A local repair shop will remove your transmission, then install a bunch of new parts during the rebuild. The problem here is, the skills and experience of each transmission rebuilder will vary widely from shop to shop, so you could have problems from something that wasn’t adjusted properly. And the 1-2 year warranty might only cover you at certain transmission repair shops, in a specific geographical area.

Solution C: Buy a Remanufactured Ford Police Interceptor Transmission

Many owners depend on their vehicle to commute and get things done. Their gasoline engines are designed to go 100’s of thousands of miles, so it makes sense to invest in a remanufactured transmission.

Need a replacement transmission? Get an estimate for replacement transmissions and local installation. Look up your transmission model by vehicle make and model.

What Transmission Do I Have?

What Problem Does Your Ford Police Interceptor Have?

Let us know the year, mileage and problem you’re having as well as any trouble (OBD) codes you’ve found. If you’ve been given a quote or paid for a repair, we’d like to hear about that too!9

Your Name
Email Not Required
0 Tell us about your transmission problems
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x