Infiniti QX4 Transmission Problems & Cost | RE5R05A | RE4R01A

The Infiniti QX4 was one of the first true luxury SUVs on the market, and it initially came equipped with the 4-speed RE4R01A. Later models got the 5-speed RE5R05A transmission, which was quite advanced back then. However the RE5R05A was known for early failure due to the factory radiator allowing engine coolant to enter the transmission through the cooling system, which sometimes can be fixed with a RE5R05A valve body replacement. But they aren’t without their problems though, so let’s look at some of the most common Infiniti QX4 transmission problems, look at cost estimates and figure out what you can do about them.

Need a replacement transmission? Get an estimate for replacement transmissions and local installation. Look up your transmission model by vehicle make and model.

What Transmission Do I Have?

Infiniti QX4 Transmission Models

Infiniti QX4: RE5R05A Transmission
Infiniti QX4: RE4R01A Transmission

Infiniti QX4 Transmission Replacement Cost Estimate

Pricing varies by model. To be 100% sure on pricing, have your VIN# handy and use our Get An Estimate feature to look up your transmission by VIN#.

Replacement Infiniti QX4 Transmission Prices:

TransmissionStreet Smart Transmission
Nissan RE5R05A2583

Remanufactured Infiniti QX4 RE5R05A Valve Body Prices:
$780 shipped at Street Smart Transmission

What are the DTC codes related to Infiniti QX4 transmission problems?

Trouble CodeDescription
U1000Cannot Communicate with TCM / Class 2 Communications Failure
U0402Invalid Data Received From Transmission Control Module
P0700Transmission Control System (MIL Request)
P0705Transmission Range Sensor Circuit Malfunction (PRNDL Input)
P0710Transmission Fluid Temperature Sensor Circuit
P0717Input/Turbine Speed Sensor Circuit No Signal
P0720Output Speed Sensor Circuit
P0725Engine Speed Input Circuit
P0731Gear 1 Incorrect Ratio
P0732Gear 2 Incorrect Ratio
P0733Gear 3 Incorrect Ratio
P0734Gear 4 Incorrect Ratio
P0740Torque Converter Clutch Circuit Malfunction
P0744Torque Converter Clutch Circuit Intermittent
P0745Pressure Control Solenoid 'A'
P0750Shift Solenoid 'A'
P0755Shift Solenoid 'B'
P1705Nissan DTC: Throttle Position Sensor Circuit Malfunction
P1710Nissan DTC: Transmission Fluid Temperature Sensor Circuit
P1721Nissan DTC: Vehicle Speed Sensor MTR
P1730Nissan DTC: A/T Interlock
P1731Nissan DTC: A/T 1st Engine Braking / 1-2 Shift Malfunction
P1752Nissan DTC: Input Clutch Solenoid Valve
P1754Nissan DTC: Input Clutch Solenoid Valve Function
P1757Nissan DTC: Front Brake Solenoid Valve
P1759Nissan DTC: Front Brake Solenoid Valve Function
P1762Nissan DTC: Direct Clutch Solenoid Valve
P1764Nissan DTC: Direct Clutch Solenoid Valve Function
P1767Nissan DTC: High and Low Reverse Clutch Solenoid Valve
P1769Nissan DTC: High and Low Reverse Clutch Solenoid Valve Function
P1772Nissan DTC: Low Coast Brake Solenoid Valve
P1774Nissan DTC: Low Coast Brake Solenoid Valve Function
P18431-2 Shift Solenoid High Voltage
P18452-3 Shift Solenoid Low Voltage

Infiniti QX4 Transmission Recalls

None Found

Infiniti QX4 Technical Service Bulletins (TSB)

None Found

Common Infiniti QX4 Transmission Problems

RE5R05A valve body problems
Although Nissan tends to make very reliable vehicles, the RE5R05A valve body can fail prematurely if the transmission is not maintained properly, and the cooling system design flaw is not addressed in time. Simply rebuilding the valve body typically will not solve problems caused by warping, cracking and damaged bores. The best way around this is to install a remanufactured RE5R05A valve body from a reputable company that has modified it to address the factory design flaws and metal fatigue. To learn more about one of these reman valve bodies, click here. You can also click here to read more about RE5R05A valve body problems.

Transmission won’t upshift from 1-2 or 2-3 – RE5R05A transmission
Problem – The transmission may hesitate or refuse to shift from 1st to 2nd gear, or 3rd to 4th gear. It may also refuse to shift manually.
Solution – These common RE5R05A transmission problems can be caused by a number of things that include dirty transmission fluid, a clogged transmission fluid filter, a failed vehicle speed sensor, direct clutch solenoid valve or inadequate line pressure. The valve body, TCM or direct clutch may have also failed, and/or there may be wiring/communication issues within the CAN bus system.

RE5R05A transmission won’t downshift
Problem – Here are the possible reasons for a no-downshift condition:

5th-4th gear: Transmission fluid level/condition, failed vehicle speed sensor, front band solenoid valve, direct clutch solenoid valve, front brake band, input clutch, inadequate line pressure, failed TCM, failed valve body wiring/communication issues within the CAN bus system.

4th-3rd gear: Transmission fluid level/condition, failed vehicle speed sensor, input clutch solenoid valve, front brake solenoid valve, TCM, valve body, wiring/communication issues within the CAN bus system, inadequate line pressure, failed input clutch.

3rd-2nd gear: Transmission fluid level and condition, failed vehicle speed sensor, high and low reverse clutch solenoid valve, inadequate line pressure, failed TCM or valve body, failed high and low reverse clutch, wiring/communication issues within the CAN bus system.

2nd-1st gear: Transmission fluid level and condition, failed vehicle speed sensor, direct clutch solenoid valve, inadequate line pressure, wiring/communication issues within the CAN bus system, failed TCM, failed valve body, failed direct clutch.

RE5R05A transmission slips or will not engage the following gears:

1st gear: 3rd one-way clutch, 1st one-way clutch, reverse brake, forward brake, direct clutch solenoid valve, valve body, gear damage.

2nd gear: Low coast brake solenoid valve, 3rd one-way clutch, direct clutch, forward brake, valve body failure, gear damage.

3rd gear: 3rd one-way clutch, high and low reverse clutch, forward one-way clutch, forward brake, failed valve body, gear damage.

4th gear: Input clutch solenoid valve, direct clutch solenoid valve, high and low reverse clutch solenoid valve, low coast brake solenoid valve, front brake solenoid valve, input clutch, direct clutch, high and low reverse clutch, valve body failure, gear damage.

5th gear: Front brake solenoid valve, front brake band, input clutch, high and low reverse clutch, gear damage, valve body failure.

Vehicle will not move when in first gear – RE5R05A transmission
Problem – After shifting into Drive, the vehicle may seem to engage first gear but it won’t move.
Solution – This problem may be caused by several things, including a failed torque converter, accelerator pedal position sensor, transmission pump, 3rd one-way clutch, 1st one-way clutch, reverse brake, forward one-way clutch or forward brake.

Poor acceleration when in Drive – RE5R05A transmission
Problem – After placing the gear selector in Drive, the acceleration may be noticeably poor given the throttle position.
Solution – This problem may be caused by several things including; a failed accelerator pedal position sensor, PNP switch, A/T position switch, torque converter failure, transmission pump failure, a failed 1st one-way clutch, reverse brake, forward brake, and/or forward one-way clutch.

Engine cannot be started when the shifter is in Park or Neutral – RE4R01A transmission
Problem – Drivers may not be able to start the engine when the shifter is in the P or N position. However, the engine may be started when the shifter is in the D, 2, 1 or R position.
Solution – The wiring related to the PNP switch, and the switch itself will need to be tested and possibly repaired/replaced.

Vehicle no longer creeps backwards within the shifter is placed in reverse – RE4R01A transmission
Problem – When the shifter is placed in the R position, the vehicle should move slowly backwards when the brake pedal is released. If this problem arises, it won’t.
Solution – A number of things could be causing this issue, including the level and condition of the transmission fluid, inadequate line pressure, a failed valve body, transmission pump, torque converter, reverse clutch assembly, high clutch assembly, low and reverse brake assembly, or the low one-way clutch.

RE4R01A Problem – Delayed 1-2 shift and quick over speed during 2-3 shift
Cause – Although this issue is often assumed to be a high clutch failure, closer examination may reveal that nothing is wrong with the high clutch circuit. A design change for the 2000 model year can cause the RE4R01A Wide Open Throttle switch / WOT switch to become stuck in the closed position. This not only causes the delayed upshifts, but it also briefly activates the RE4R01A solenoid A right before the 2-3 shift, giving the overspeed sensation. RE4R01A transmissions built prior to the 2000 model year will experience delayed upshifts in all gears, without the 2-3 overrun.
Solution – Repair or replace the WOT/Idle switch, which is incorporated with the throttle position sensor / TPS sensor.

RE4R01A Planetary gear failure
Problem – The fin type transmission cooler that is commonly found in the Nissan Pathfinder, Nissan 200SX and Nissan 300ZX can become cogged, which will then restrict flow to the planetary gear, causing it to fail due to overheating.
Solution – Instead of replacing the entire radiator, Nissan has released a spiral type cooler replacement kit – Nissan part number 21606-15V25

Shift cycling from 4th-to-3rd-4th
Problem – The RE4R01A transmission may seem to shift in a 4-3-4 cycle.
Solution – Repair or replace the ‘D’ range signal wire to the inhibitor switch. The problem may also be caused by a corroded or broken pin inside the harness connector, or the inhibitor switch itself may have failed.

Lack of Response
Leaking Fluid
Low Fluid
Burning Smell
Grinding or Shaking
Whining, Clunking or Humming
Refuses to Go Into Gear
Torque Converter Issues
Valve Body Issues
Transmission Noisy in Neutral
Gears Slipping
No 3rd or 4th Gear
No 1st or 2nd Gear
No Reverse
Dragging Clutch
Trouble Codes / Check Engine Light

Can I drive with a transmission problem?

If your Infiniti QX4 can still make it up and down the road, you might say “It’s fine, I’ll just drive it until I can get it fixed”. But that is not always a good idea, depending on the symptoms. You see, there are a lot of (very expensive) moving parts inside of a transmission, and if something isn’t right, continuing to drive with a transmission problem could damage something else.

How often does a Infiniti QX4 transmission need to be replaced?

The overall lifespan of a Infiniti QX4 transmission largely depends on how well it was maintained. Factory design flaws also factor into this equation (including the radiator issue that plagued the Nissan RE5R05A in the Pathfinder, Armada, Titan, Frontier and Xterra), along with how/how hard you drive. But on average, we’ve seen the Infiniti QX4 transmissions last for between 130,000-180,000 miles. A high quality replacement transmission however, can last considerably longer if all of the factory design flaws have been addressed and the vehicle has been maintained.

How are Infiniti QX4 transmission issues diagnosed?

It is fairly easy to guesstimate what the root cause of your Infiniti QX4 transmission problems might be, but you won’t truly know unless you have the right tools and experience. A good mechanic or transmission repair center will be able to connect your truck to a computer and find out which diagnostic trouble codes (DTC’s) have been stored. Once they know what to look for, they can perform a visual inspection to verify the problem.

How is a Infiniti QX4 transmission replaced?

In order to replace your Infiniti QX4 transmission, the truck has to be lifted from the ground in order to gain access to all of the parts that will need to be unbolted. Then the transmission can be lowered to the ground (typically with a transmission jack), so the new transmission can be installed.

Recommendations for Infiniti QX4 transmission issues?

To save time and get back on the road faster, have your 17-digit truck VIN# handy and you can get an online quote for a reman Infiniti QX4 transmission here, then find a local shop using our Find a Shop guide to install it for you.

How to Solve Infiniti QX4 Transmission Problems

Solution A: Buy a Used Infiniti QX4 Transmission

The quickest way to fix your transmission problems is to simply buy a used transmission or used transmission. These can be found at most junk yards, and they often come with a 30-90 day warranty. However, there’s no way to determine the actual condition of the internal components, so you could be spending a bunch of money to have the exact same problems. Plus, that warranty only covers the transmission if it’s defective, not the labor costs that you’ll have to pay.

Solution B: Buy a Rebuilt Infiniti QX4 Transmission

Another option would be a rebuilt transmission or rebuilt transmission. A local repair shop will remove your transmission, then install a bunch of new parts during the rebuild. The problem here is, the skills and experience of each transmission rebuilder will vary widely from shop to shop, so you could have problems from something that wasn’t adjusted properly. And the 1-2 year warranty might only cover you at certain transmission repair shops, in a specific geographical area.

Solution C: Buy a Remanufactured Infiniti QX4 Transmission

Need a replacement transmission? Get an estimate for replacement transmissions and local installation. Look up your transmission model by vehicle make and model.

What Transmission Do I Have?

Many owners depend on their vehicle to commute and get things done. Their gasoline engines are designed to go 100’s of thousands of miles, so it makes sense to invest in a remanufactured transmission.

Your Name
Email Not Required
5 Tell us about your transmission problems
Inline Feedbacks
View all comments
angelo DeVivo
2 years ago

own qx4 2003 dealer will not drain fluid ihave no issues but vech has 130 000 miles has not been replaced since 35 000

Johnpaul
4 years ago

I was driving and,got stuck in snow and now my reverse is messing up

Dejene Lenjesa
5 years ago

Hi There When I was drive my QX4 infinity 1997 before yesterday I was drive in high way 120 km and later when I come home I was drive the same speed for 20 minute drive and all of the sudden when I give the gas pedal RPM it goes up 4 and the speed of the car is 60km sometime the D drive it doesn’t speed up I change to D2 with the speed of 60km perour. what is this kinds of problem do you think:?

Winter Morse
2 years ago
Reply to  Dejene Lenjesa

My doing same thing Or also I put it into drive n it hestas to take off

Tessa Lange
2 years ago
Reply to  Dejene Lenjesa

It wont shift into 1st or reverse. If it does, theres a grinding noise until it shifts into 2nd. My ABS light has been on since last guy put a bushing on. I have a radiator leak, tried to fix with Marvel Bars Leak. Not sure if it took place

5
0
Would love your thoughts, please comment.x
()
x